Posts Tagged "home elevators calgary"

9Dec

Greener Elevators and Lifts can save you money

by Andrew @ Uppercut
Commercial Accessibility Home Accessibility Home Elevators News and Such

When I think of making an environmentally sound decision, especially if it pertains to green elevators or a lift purchase, I can point out 3 contributing factors .

 

                          alberta               #1 Where is the device  manufactured?

This seems pretty obvious but if you can purchase a locally manufactured elevator or lift, the transportation impact can be minimized. Buying local not only reduces emissions it saves you money on shipping costs associated with replacement parts.

 

 

#2 What impact could the drive mechanism have on the environment?

Devices that utilize large hydraulic pumps and reservoirs may need to have precautionary measures were taken, such as oil separators in the event of a hydraulic oil leak. This is to ensure that the oil cannot seep into the ground or water table. Some jurisdictions in the past have asked that food grade oil is used in order to alleviate this concern. Elevators and lifts that utilize a Traction Home elevatorCounter Weight or Screw Drive don’t actually pose this risk, as no hydraulic fluid is used. These greener solutions only require a 2″-3″  pit (or no pit at all) so there is less concern with disturbing ground water. You may even be able to save some money on your site preparation as hydraulic elevators can require anywhere from a 6″ to 60″ pit.

#3 What are the ongoing energy costs?

This cost is two fold; the energy consumed as it relates to the environment and the monetary cost directly to you. Do your research on how much energy your elevator or lift will require operating. Devices with a mechanical advantage such as a traction counterweight drive will be up to 50% more energy efficient that a comparative hydraulic unit. Hydraulic elevators have to pump fluid into a cylinder which is often located in a separate machine room.

It doesn’t matter if  your goal is to consciously protect the environment or simply save some money (energy costs, site preparation , and maintenance), it’s apparent that the two can go hand in hand.

 

For more information Elevators and Lifts please click here or contact us for a free consultation.

 

3Nov

Uppercut Elevators and Lifts – A local company serving the entire province of Alberta

by Andrew @ Uppercut

What makes a company local? It is my belief that to be truly local your company needs to encompass the following principles:

LOCAL OWNERSHIPAlberta-flag

It’s not good enough to have a local manager or even a local owner that has other interests and doesn’t make the time to come into the office every day. Local owners answer the phone, deal with client concerns directly, and treat their staff fairly. After all, the owner sets the standard as to how the business operates. We believe in being accountable, fair and ethical. At Uppercut Elevators and Lifts, ownership is present every day  to make sure this standard is met.

OFFICES IN BOTH CALGARY AND EDMONTON

Believe is or not there are some companies that would mislead you into believing they are local because they have a PO box and a sales person who is willing to travel to your city on occasion. We believe in hiring the best local individuals who are able to participate and give back to the communities where they work and live. We believe it is imperative that local staff  are available to meet with you on your schedule not “when they are in town next”. We are proud to have offices in both Calgary and Edmonton, that are staffed with local employees.

LOCAL PRODUCTS

Our Elevators and Vertical Platform Lifts are manufactured in Alberta by Albertans. In these tough economic times, it only makes sense to support the business and tax base where we live.

PROUD TO BE LOCAL

We are pleased to be able to service the entire province of Alberta with our  superior elevator and lifting product line. We know we can accommodate  the needs of our clients better if we hire local representatives, and ownership is present to steer the ship in the right direction. We are proud to be a truly local company operating in Alberta.

 

For more information on our products click here

To find a local representative click here

You can find our products installed in Cold Lake, Edmonton, Drumheller, Red Deer, Strathmore, Calgary, Okotoks, High River, Lethbridge, Vulcan, Brooks, Olds, Medicine Hat, and all across the great province of  Alberta

 

16Jul

Custom Glass Elevators

by Andrew @ Uppercut

We recently completed a custom glass elevators project that started out with many unique challenges . We were asked to install a glass elevator within a spiral staircase. The device could not utilize a pit as there was in-floor heating, nor did they want to give up space for a machine room. These requirements alone can create  issues due to space and functionality, but when paired with the request of a glass car and hoistway,  the challenge was multiplied.

Door open in glass elevator

Door open in glass elevator

 

 

My first call was to RAM Manufacturing where their engineering team had to determine if we could even fit the device in such a small space. After a bit of deliberation, the design included a pie shaped platform utilizing a traction counterweight drive mechanism. This elevator featured a machine room-less drive and had a low profile car floor so we did not need a pit. In order to preserve space, we incorporated an off-board controller that was located in a room beside the elevator enclosure. These features made it possible for us to maximize the elevator car, and create a functional elevator that can accommodate 2 people with an 800lb capacity.

 

Now that we knew that we could physically fit the device in the stairway core, we need to address the  request of having as much glass in the elevator as possible. We did this at the client’s request in order to maintain an “open view” through the stairway core.

The car was designed to have wood panelling to match  home décor on the controller wall, with curved glass surrounding the rest of the car area. The doors were made entirely of glass  with a stainless steel trim. To these doors, we incorporated our interlocks for safety. The contractor then fabricated  glass panels held together with stainless steel “clips”. These panels served as the elevator hoistway or shaft.

The end result was an unobstructed view where you could look straight through the elevator on the upper floors. We maintained the look of the home without taking up any valuable square footage and avoided a costly addition. All in all, we are very pleased with this project and look forward to many more custom elevators in the future.

 

glass elevator hoistway walls custom glass elevator glass elevator between floors glass elevator rail wall for glass elevator glass elevator with door open Exterior glass elevator view controller and tower of power glass elevator car floor

For more information on custom elevators please contact Uppercut Elevators and Lifts

23Jun

Advantages of (Machine Room-less) MRL Elevators

by Andrew @ Uppercut

This article is not referring to passenger elevators and is intended to discuss the advantages of MRL Elevators in a residential or commercial accessibility lift setting. A machine room-less elevator or an MRL Elevator is a device that typically houses the drive mechanism at the top of the hoistway. By doing this the need for a machine room is eliminated, as the entire device is contained within the elevator footprint.MRL elevator

Units that require a machine room( like most hydraulic drives) will also require the electrical and hydraulic hoses to run through a wall from the machine room to the elevator hoistway. In cases where the machine room is not adjacent to the elevator, a remote machine room will be required.  This can be costly and create logistical problems with the running of hydraulic hose through the floor, ceiling or in the walls. It also poses several maintenance concerns; What if a hose ran through a ceiling for instance and it starts to leak? Will it be possible to do a scheduled hose replacement? What type of ongoing costs should you expect in this application? This is a definite advantage of an MRL, having the entire elevator in one contained space.

The second advantage is quite simple; with an MRL elevator, you do not have to allocate the additional space to house the drive mechanism. Depending on the drive system and whether the installation is residential or commercial (B-355),  a machine room could require anywhere from 12  to 20 square feet.  This is space that could be used for storage, a larger elevator car, or a revenue opportunity (like a couple of extra tables in a restaurant).

Finally look at all the costs associated with constructing that machine room. If you think about it,  its equivalent to the cost of half the elevator hoistway  (2 stop). On top of the basic room construction, you will need to provide lighting, possible drains, sump pumps or oil separators, additional sprinkler/smoke detectors, and an additional door (fire rated in a public application).  These costs can add up quickly, and should be considered when calculating the overall cost of the elevator.

To recap MRL Elevator units will:

  • Save you money when it comes to maintenance
  • Require less space
  • Reduce the initial cost of construction

For more information on Commercial MRL Elevators click here For more information on Residential MRL Elevators click here

26May

Choosing a drive mechanism for your elevator

by Andrew @ Uppercut

While many of our clients seem to spend a lot of time selecting elevator car finishes and aesthetic options , very little time appears to be allocated to discussing the drive mechanism. I can’t really blame them; after all talking about what moves that fancy box you just designed can seem  quite boring.  We however, feel it is important for our clients to get as much information as possible, especially when it concerns such an important aspect like the drive of your elevator.

In this blog I will be discussing the strengths and weakness of the following drive mechanisms.

  • Hydraulic
  • Traction Counter Weight

Hydraulic

This system utilizes a pump motor and oil reservoir, to force hydraulic fluid through a hose to a cylinder. The pump motor and reservoir are usually located in a separate machine room. If you areHydraulic Drive unable to provide a  borehole at the bottom of the pit you can use a roped hydraulic system.

Strengths

  1. Price point for the equipment will be in the mid-range when comparing other drives
  2. Machine room is easily accessible for servicing
  3. Manual lowering is inside the machine room
  4. Smooth ride and landing function providing the valve settings are adjusted correctly
  5. Usually, incorporates battery lowering in  the standard product offering
  6. Many manufacturers to choose from

 

Weaknesses

  1. A machine room will be required which equates to extra construction costs
  2. Hydraulic fluid temperature can affect performance
  3. Typically a pit of 8″ – 14″ is required
  4. Some jurisdictions may require a pit drain and an oil separator to ensure leaking fluid can’t enter the water table
  5. Power consumption will be 2-3 times higher than a traction counterweight system – Therefore more ongoing costs
  6. Maintenance costs on hydraulic units will be 2- 4 times  higher (over a 10 year period) due to the potential of leaks and issues with valves , gaskets, and the pump.
  7. Variable usage patterns can accelerate fluid degeneration
  8. If hydraulic fluid leaks there is the potential for the smell to permeate throughout the building
  9. Levelling and re-adjusting (anti-creep) issues

Traction Counter Weight

A traction counterweight drive operates the elevator by having  the mass of a series of  weights counter the elevator car and its occupants. If the user selects a command the elevator motor powers a cable (through a sheave) past the balance point and the device travels at a regulate rate in that direction.

   Strengths  

  1. Lower power consumption than hydraulic or winding drum systemsHome elevator
  2. Minimal  maintenance due to simple design with lower repair costs
  3. No machine room required
  4. Minimal 3″ pit required (or no pit at all with a small threshold ramp)
  5. No worry of hydraulic leaks or smells over the life of the elevator
  6. Variable speed drive for soft stop and start
  7. Low standby power
  8. Minimal issues with levelling even with variable capacities

Weaknesses

  1. Typically the equipment cost will be 10% – 15% higher than Hydraulic units (overall cost may be less when you consider construction and maintenance)
  2. Access to the motor is at the top of the hoistway (for the service technician)
  3. Manual lowering crank is accessed from the top landing
  4. Auto car lowering (similar to battery back-up) can be added for an additional cost
  5. Not a lot of manufacturers to choose from in the Alberta marketplace

A PDF summary of this document can be found here ——> Hydraulic vs Traction

31Mar

Residential Elevators – What do they cost?

by Andrew @ Uppercut
Home Elevators

This is by far the number one question we get asked at Uppercut Elevators and Lifts. How much for an elevator? There is no straight forward answer, as many variables come into play. In this blog post however,  I will attempt to give you the tools to determine a reasonable estimate for your elevator  including the installation . Please note that these prices are product specific, and are based on our current pricing structure. This article is only attempting to give you a reasonable “ballpark” figure for your home elevator. Obviously, prices will vary depending on your supplier.

Elevator in home

Elevator in home

Cost Variables

For the purpose of simplicity we will base the elevator specification on the following:

2 stops ( we will use basement and main floors as an example)

Automatic operation (otherwise it is an accessibility lift)

Entrances on the same side

Standard finishes

11 feet of travel (from top of basement floor to top of the main floor)

Light screen protecting the entrance side

Machine-room-less application

Small ramp or 2″ pit requirement

20 feet/ minute speed

800lb Capacity

40″ X 54″ car size

Installation of your elevator in Calgary

 

I thought it necessary to mention the pit depth and the lack of a machine room as these are contractual requirements  that affect the overall cost. We will address these variables later on.

More detailed information on this product offering can be found here

Elevator Cost

It would be reasonable to expect the cost of the above-mentioned device to sell for around $17,500.00. Adding a third stop, say to a mid landing garage at grade would involve the additions of a second light screen, another interlock and call station. You could expect this to add about  $1,000.00 to your overall cost. A smaller car will save you money while a larger one can add $400.00 – $500.00. If you reduce the  travel of your elevator (less than 9 feet) the device could cost up to a $1000.00 less ,while the opposite may occur if your home elevator needs to travel up to 14 feet. Devices travelling more than 14 feet usually utilize a different drive mechanism, which involves a per foot charge and a different product offering such as the RAM Crystal.

Contractual Costs or Site Preparation

Stratus – Residential Elevator

Stratus – Residential Elevator

Knowing the cost of your elevator only gives you half the information. The work required prior to a factory trained technician installing your device is the other cost you will have to account for. The following is a brief summary of contractual work that may have to be done.

  • Pit or ramp – we typically  ask for a 2-3 inch pit but some models (usually hydraulic) require up to a 14″ recess in the floor. In some jurisdictions, you may need a pit drain and/or a sump pump, as well as a hydraulic oil separator. If a pit is not possible you will need a small ramp granting access up to the elevator car floor.
  • Electrical – this varies but most devices require both 120 VAC and 220 VAC brought to the appropriate disconnect.
  • Machine room – Hydraulic units and some cable drives typically  require a machine room. This is not only a cost you will have to absorb, it’s also space you will have to part with. I personally prefer machine room-less elevators for this reason.
  • Hoist-way Structure – These are the walls around your elevator which include the rail wall blocking. They are usually built using wood construction (2×4 or 2×6). Standard household doors (solid core) will also need to be provided.

For a complete list of the contractual requirements please click below.

Drawings and contractual requirements for this device can be found here

 

If you require any additional information on home elevators or  lifts please do not hesitate to contact us.

 

 

 

 

9Mar

Planning for a Residential Elevator

by Andrew @ Uppercut
Home Elevators

Planning for a Residential Elevator

People install a residential elevator in new home construction for many reasons. Some folks implement an elevator into their design for luxury, others out of necessity, but the vast majority of people I see do it so they may age in place. It is very important to do your research and understand your options.  As the saying goes “if you fail to plan you plan to fail”. This statement certainly applies to your aging in place elevator. There are several factors you must consider to ensure that your home elevator will meet both your needs today, and in the future.

Elevator in home

Elevator in home

 

The first thing to consider is car or platform size. I have heard numerous times ” we don’t need the elevator to fit a wheelchair” , my answer is always “we hope for the best but plan for the worst” If you are going to the expense of adding an elevator to your home, we need to consider wheelchair accessibility. My experience working with home medical companies tells me that we need a minimum platform size of 34″ x 54″. Many standard platforms are 48″ long, please try to resist going with the smallest platform available.

Home elevator with a gate

Home elevator with a gate

Next we must decide on the aforementioned gates, elevator doors or light screens. As you travel in your home elevator we need to ensure that you cannot come into contact with the hoistway that houses the device. While all mechanisms will accomplish this, they vary in ease of use, aesthetics, and cost. An automatic elevator door is probably the most aesthetically pleasing and is very easy to use (it automatically opens and closes) but it is by far the most costly option. Next in the cost category would be an accordion gate. You won’t break the bank by adding gates to your residential elevator car, but they don’t have a great reputation when it comes to looks or ease of use – especially for wheelchair users. The final and most cost effective option would be a light curtain. This “virtual gate” ensures that if any object comes into contact with the residential elevator hoistway the elevator instantly stops. They operate using a series of light beams that shoot across the entrance way, if the beam is “broken” the elevator ceases to operate until the obstruction is removed and a floor is selected. From a wheelchair users perspective or anyone with limited mobility not having to reach back and close a gate eases the use of your home elevator.

Home elevator with a light curtain

Home elevator with a light curtain

Elevator in home Elevator car 1 e1424535547307 Home elevators residential lifts commercial lift

The best way to ensure all these points are considered is to consult a professional. Many elevator companies will offer no cost or obligation consultations. They should be able to address your needs and answer your questions prior to you paying a deposit or making a commitment. Don’t base your elevator design from the back of a brochure, or from a generic drawing. Remember, site specific drawings will ensure that your elevator will meet both your needs today and allow you to age in place.

For more information on a residential elevator call us today.

 

5Mar

Elevator and Residential Lifts Education Day

by Andrew @ Uppercut

Residential Lifts Education Day

Curved stair lift

Curved stair lift

We will be co-hosting an elevator and Residential Lifts education day with Medichair on March 25th. This will be an informative session where we will discuss the features and benefits of Residential Lifts and Residential Elevators. It will be informal and the floor will be open to ask questions.

Uppercut will be speaking about the benefits of Residential Lifts and will be available to discuss all products and services. Uppercut and Medichair offer the largest selection of Lifts and Elevators in Calgary and Edmonton. Be sure to visit our education day session to learn more about the benefits and to check out our great prices.

Our team offers the highest level of customer service in Calgary and Edmonton. We are a call away for any of your questions relating to our products and services. We offer onsite service and demos of our products and our team has decades of experience. Our education day will assist you select the best product for your home.

 

 

Trus-T-Lift™ Unenclosed - Porch Lift

Trus-T-Lift™ Unenclosed – Porch Lift

 

 

 

 

 

 

 

Residential Lift Topics covered will include:

Lunch will be provided from 12:00 – 12:30

The address and a map can be found here.

Everyone is welcome but space is limited so please register with Bonnie as soon as possible.

Bonnie Flick – bonnief@medi-options.com or 403.252.5366

This event will be hosted by Andrew Smith and Melanie Rorstad and a package dealing with product offerings on Residential Lifts and “ball park” pricing will be provided. Come visit us and learn more about our products and services. Our team is always here to help. Please be sure to call ahead to schedule time to visit as space will limited.

We hope to see you there!