Posts Tagged "vertical platform lifts calgary"

9Dec

Greener Elevators and Lifts can save you money

by Andrew @ Uppercut
Commercial Accessibility Home Accessibility Home Elevators News and Such

When I think of making an environmentally sound decision, especially if it pertains to green elevators or a lift purchase, I can point out 3 contributing factors .

 

                          alberta               #1 Where is the device  manufactured?

This seems pretty obvious but if you can purchase a locally manufactured elevator or lift, the transportation impact can be minimized. Buying local not only reduces emissions it saves you money on shipping costs associated with replacement parts.

 

 

#2 What impact could the drive mechanism have on the environment?

Devices that utilize large hydraulic pumps and reservoirs may need to have precautionary measures were taken, such as oil separators in the event of a hydraulic oil leak. This is to ensure that the oil cannot seep into the ground or water table. Some jurisdictions in the past have asked that food grade oil is used in order to alleviate this concern. Elevators and lifts that utilize a Traction Home elevatorCounter Weight or Screw Drive don’t actually pose this risk, as no hydraulic fluid is used. These greener solutions only require a 2″-3″  pit (or no pit at all) so there is less concern with disturbing ground water. You may even be able to save some money on your site preparation as hydraulic elevators can require anywhere from a 6″ to 60″ pit.

#3 What are the ongoing energy costs?

This cost is two fold; the energy consumed as it relates to the environment and the monetary cost directly to you. Do your research on how much energy your elevator or lift will require operating. Devices with a mechanical advantage such as a traction counterweight drive will be up to 50% more energy efficient that a comparative hydraulic unit. Hydraulic elevators have to pump fluid into a cylinder which is often located in a separate machine room.

It doesn’t matter if  your goal is to consciously protect the environment or simply save some money (energy costs, site preparation , and maintenance), it’s apparent that the two can go hand in hand.

 

For more information Elevators and Lifts please click here or contact us for a free consultation.

 

9Nov

Commercial accessibility lifts, and their limitations under the B-355 code

by Andrew @ Uppercut

Commercial accessibility lifts are a cost  effective solution when it comes to making public buildings accessible. Vertical platform lifts or VPL’s can eliminate barriers for wheelchair users or those faced with mobility issues. Their relatively small footprint and minimal contractual requirement make them ideal for existing public buildings where accessibility is a concern. They do however have their limitations under the B-355 code, which they are inspected.

IMG_9377

Enclosed lift

The first consideration is platform size. Public accessibility lifts are mandated to have a platform that is no greater the 21 square feet. A typical “large” wheelchair lift would have a 48″x 60″platform. This size of platform is big enough to accommodate a wheelchair user doing a 90-degree turn. A more common size would be in the range of 34″ x 54″ where the user enters and exits on the same side, or travels through the platform and exits on the opposite side.

Next, we must look at the  travel restrictions that are imposed within the code. Enclosed  B-355 accessibility lifts can travel no more than 7000mm or 23.1 feet. Unenclosed wheelchair lifts can travel up to 2500mm or 98.25″. Enclosed units will require a hoistway constructed around the device with a door at the lower landings and the minimum of  a gate at the uppermost landing. Unenclosed units travelling more than 500mm (19.65″) will require a gate or a door at the upper landing. It should be noted that any lift penetrating a floor will be required to be an enclosed vertical platform lift needing a hoist-way constructed.

The weight capacity  of wheelchair accessibility lifts varies from manufacturer to manufacturer, but most unenclosed vertical platform lifts have a capacity of either 550lbs or 750lbs. Enclosed units usually have a capacity  somewhere between 750lbs – 1400lbs.

 

20150122_132001

Unenclosed lift

 

 

Perhaps the biggest drawback of public accessibility lifts is the requirement for them to operate using constant pressure. This simply means you must hold the button for the device to operate. This is partially due to the fact the lift platform has no gate or sliding elevator door.

As universal accessibility for all members of society  is now considered the norm , the popularity of these barrier free lifts has increased. You can find barrier-free accessibility lifts  in most schools, community centres and places of worship.

 

For more information on commercial accessibility lifts please contact us for a free consultation

 

 

 

 

 

3Nov

Uppercut Elevators and Lifts – A local company serving the entire province of Alberta

by Andrew @ Uppercut

What makes a company local? It is my belief that to be truly local your company needs to encompass the following principles:

LOCAL OWNERSHIPAlberta-flag

It’s not good enough to have a local manager or even a local owner that has other interests and doesn’t make the time to come into the office every day. Local owners answer the phone, deal with client concerns directly, and treat their staff fairly. After all, the owner sets the standard as to how the business operates. We believe in being accountable, fair and ethical. At Uppercut Elevators and Lifts, ownership is present every day  to make sure this standard is met.

OFFICES IN BOTH CALGARY AND EDMONTON

Believe is or not there are some companies that would mislead you into believing they are local because they have a PO box and a sales person who is willing to travel to your city on occasion. We believe in hiring the best local individuals who are able to participate and give back to the communities where they work and live. We believe it is imperative that local staff  are available to meet with you on your schedule not “when they are in town next”. We are proud to have offices in both Calgary and Edmonton, that are staffed with local employees.

LOCAL PRODUCTS

Our Elevators and Vertical Platform Lifts are manufactured in Alberta by Albertans. In these tough economic times, it only makes sense to support the business and tax base where we live.

PROUD TO BE LOCAL

We are pleased to be able to service the entire province of Alberta with our  superior elevator and lifting product line. We know we can accommodate  the needs of our clients better if we hire local representatives, and ownership is present to steer the ship in the right direction. We are proud to be a truly local company operating in Alberta.

 

For more information on our products click here

To find a local representative click here

You can find our products installed in Cold Lake, Edmonton, Drumheller, Red Deer, Strathmore, Calgary, Okotoks, High River, Lethbridge, Vulcan, Brooks, Olds, Medicine Hat, and all across the great province of  Alberta

 

19Jun

Comparing Porch Lift Features

by Andrew @ Uppercut

When choosing a porch lift supplier it is important to do a detailed  comparison to ensure that the specifications of each product and company match.

Areas where discrepancies can occur include:

  • Standard platform size – You should note that not all manufactures make a standard platform the will accommodate a larger wheelchair or scooter. This is sometimes a costly upgrade so it needs to be discussed up front.

 

  •  Finish – Some lifts are painted while others come with a durable powder coated finish. Remember to ask about the costs associated with powder coating your lift.

 

  • Capacity – 750lbs seems to be the industry standard but there are still some 550lb capacity lifts on the market

 

  • Cold weather operation – Some porch lifts require the addition of an outdoor package. If your lift is exposed to the elements make sure it has this provision or a feature like a “Zero load start”  to ensure your lift operates in cold temperatures

 

  • Safety features – Ask about the safety record of the lift. Does it have a fall arrest system, platform kick plate, and easy to access manual lowering device?

 

  • Where you buy – This is hard to quantify at the time of purchase, but it must be considered when making your decision. An indication of the type of company you are dealing with may be given by the sales person. Did they return your call promptly? Did they offer to come out and meet with you, or did they just send a quote? Were they prepared with brochures, and was the quote they provided comprehensive? How many people do they employ, and do they have the resources to service your porch lift if needed?

For more information on porch lifts, including funding and site preparation requirements please click here

TrustT Porch Lift Features

5Jun

New Government Funding for Home Accessibility

by Andrew @ Uppercut
Home AccessibilityThe government is proposing a new, non-refundable home accessibility tax credit for seniors and persons with disabilities that will provide tax relief of 15 per cent, up to $10,000 of eligible expenditures per calendar year, per individual, to a maximum of $10,000 per dwelling. The credit could be used on costs incurred to renovate or alter a home in order to provide better access to or inside the dwelling. Items could include vertical platform lifts ,wheelchair ramps, stairlifts (or stair chair lifts) as well as exterior porch lifts. The program would also cover home elevators if they are installed due to an accessibility need.
                                                             
Elevator in home Elevator car 1 e1424535547307 Home elevators residential lifts commercial lift
The information is listed on page 245 of the budget

 

15Apr

What’s the difference between a residential elevator and a residential vertical platform lift

by Andrew @ Uppercut

The short answer is vertical platform lifts are typically installed due to an immediate accessibility requirement, while elevators are usually incorporated for luxury or ageing in place purposes. Of course, there are always exceptions, so it is important to understand the limitations  and features of each device.

Trus-T-Lift™ enclosed – Vertical platform lift

Trus-T-Lift™ enclosed – Vertical platform lift

Code

While residential elevators and lifts are not inspected in Alberta, there are governing codes that exist. Elevators fall under the B-44 code while accessibility lifts are built to meet the B-613 code. Ultimately it is these codes that provide the distinction between the products.

Constant pressure or automatic operation

Elevators utilize automatic operation, while a lift will require that you hold the button for the device to function. Holding the button or constant pressure operation limits your risk for pinching or shearing hazards. I go into more detail below.

Elevator car or lift platform

An elevator will always have an enclosed car usually complete with a ceiling. Your entrances will have either a light curtain, accordion gate or a sliding elevator door. This is due to the above mentioned automatic operation. A lift, on the other hand, will have an “open platform” so the hoistway around you is exposed, thus the requirement for constant pressure operation.

 

 

Speed 

Lifts will have an operating speed of 8ft/min – 18ft/min. An elevator usually functions between 20ft/min – 40ft/min.

Capacity

Crystal – Residential Elevator

Crystal – Residential Elevator

Capacity usually isn’t a factor as platform sizes are limited, but lifts will start at 550lbs (most are 750lbs) and elevators will range from 800lbs – 1400lbs.

Flexibility and features

While I have installed  some pretty fancy lifts in my time, most of the  upgrades people look for are usually only offered with an elevator purchase. These can include, automatic homing, hands-free phone systems, and custom interior finishes. We can usually make an elevator fit into the desired space while a lift is more of a “cookie cutter” design.

Cost

For the purpose of comparison let’s use a 2 stop with 10′ of travel, and entrances on the same side. A lift will cost you approximately $13,000.00 and an elevator will land around the $17,000.00 mark.

This obviously is general information and is based on specific product offerings, but should give you the tools to differentiate between an elevator and a lift.

Drawings and the corresponding site preparation for these devices can be found here

More information on residential elevators can be found here

More information on residential lifts can be found here

 

 

16Mar

Commercial Accessibility Lifts – Understanding the Code and Approval Procedure

by Andrew @ Uppercut
Lift

Enclosed Lift in a glass hoist-way

 

 

Commercial accessibility lifts are governed by the B-355 code. If a lift is being installed in a public application make sure that your lift provider specifies that the product is B-355 code compliant. All public lifts are required to be registered with the Alberta Elevating Devices Amusement Rides Safety Association (AEDARSA). After a lift is registered, and the engineered stamped drawings are reviewed, AEDARSA then issues a Certificate of Construction. Now your lift provider may proceed with the installation of your elevating device. After the installation is complete AEDARSA will need to be booked  for the initial inspection.

 

 

 

 

To recap the procedure is:

Trus-T-Lift™ with platform gate

Unenclosed Lift with platform gate

  1. Generate engineered drawings (lift provider)
  2. Registration of the lift with AEDARSA (lift provider)
  3. Review of the drawings  (AEDARSA)
  4. Issue certificate of construction (AEDARSA)
  5. Installation (lift provider)
  6. Inspection (AEDARSA)

Now that we understand the procedure it is important to know some of the code restrictions as they pertain to vertical platform lifts.

Travel

Enclosed B355 devices  are limited to a total travel of 7000mm or about 23 feet, while unenclosed lifts may  travel up to 2500mm or 98.25 inches. It`s important to note that unenclosed platforms may not penetrate a floor. Travel is defined as the floor to floor measurement. This typically limits accessibility lifts to 3 story buildings.

Platform size

The platform or lift car is limited to 21 square feet. If the platform is configured in a straight through application a 34x 54 inch (12.75 square foot) car size is often acceptable. If the site dictates adjacent access or a 90 degree turn, we recommend a larger platform to make the turn easier for the wheelchair user.

Constant Pressure

This is one of the major restrictions of the code. Public accessibility lifts are required to operate using constant pressure. This means you must hold the button in order for the lift to operate.

Commercial accessibility lifts

Enclosed lift with full height car

Capacity

Depending on the manufacturer, your vertical platform lift may have a 550, 750, 800, or 1000lb capacity. Some manufacturers make lifts than can accommodate up to  1400lb, but it should be questioned as to why you want this higher capacity, as there are limitations on platform size.  They may be  designed to accommodate an individual user in a wheelchair, or allow for an attendant as well. Your lift provider should make sure the platform size and capacity meet your specific needs while still satisfying code.

Hoist-way Construction

This work would typically be completed by a third party (not the lift supplier). Each lift will have specific criteria regarding the contractual requirements but it can be broken down into Enclosed and Unenclosed applications. The following documents explain the contractual requirements for each elevating device.

VPL Enclosed requirements for public applications

VPL Unenclosed requirements for public applications

For more information on commercial accessibility lifts click here

 

 

 

 

 

11Mar

Residential Lifts – What is a Porch Lift?

by Andrew @ Uppercut

Residential Lifts – What is a Porch Lift?

My career into the world of elevators and lifts started out as a technician, primarily installing and repairing residential lifts such as porch lifts. In my 17 years I have I have sold, repaired and maintained a multitude of different devices. I have leaned what products stand the test of time, and which ones fall short. The following is a list of things you should consider before you purchase a porch lift.

                                                                      Drive Mechanism

reslifts_5

 

There are really only two choices in Alberta , ACME  Screw drive or hydraulic. Both mechanisms are safe and incorporate the required safety redundancies, but there is a big difference when it comes to how they function in the cold weather. When hydraulic fluid gets cold it thickens, which can cause the porch lift to operate slower, or not function at all . For this reason (along with an increased costs) I would typically never offer a hydraulic unit in an outdoor application.

Features like a Zero Load Start will lessen the strain on your porch lift during the  initial start up. This offering allows the motor to cycle prior to picking up the load and lessens the chance of blowing  the house breaker. Having a device with a direct drive (no gearbox) will also aid in your lifts functionality during the cold weather.

 

 

Platform Size

Most manufacturers make several platform sizes so it is important that your quote specifies the

Trus-T-Lift™ unenclosed – Porch Lift

Trus-T-Lift™ unenclosed – Porch Lift

size that will meet your needs. While a 48″ long platform may meet a portion of the populations requirements, I recommend a platform the is 54″ long. This longer platform will be able to accommodate most wheelchair users and an attendant if necessary. Widths are pretty much standardized in the industry with a typical size being between 34″-36″. If your porch lift needs to be configured to have adjacent access or a 90 degree turn, it is important to have a platform size of 40″ wide x 54″ long. This will ensure that the individual using the device can make the turn with ease.

Solid or Steel Mesh Platforms

If you choose a porch lift with a solid (non-see though) platform you will be required to purchase a device with an under-pan sensor. This sensor is necessary to ensure that you will not crush objects that you can not see under the platform when moving in a downward direction. The good news about under-pan sensors is that they work. The bad news is they can be temperamental  and cause the lift not to run. I remember one of my first service calls; I was dispatched to a lift that had gone up but would not come back down. Upon examination I had discovered that the under-pan had dropped down as it is intended to do, but the plunger switches that monitor the pan were frozen in the engaged position. The lift “thought” there was an obstruction, and therefore would not operate in the downward direction. For this reason I prefer lifts that have steel mesh platforms where the user can see any obstructions below the lift. I find it to be a simpler solution to this safety concern. The mesh also allows the rain and snow to fall through the platform, lessening the chance for ice build up and platform warping.

                                                                                                   Controls

Upper landing gate

Upper landing gate

Due to code restrictions, residential lifts such as porch lifts or vertical platform lifts are required to operate under constant pressure. This means you have to hold the button for the lift to run. For this reason it is recommended that the buttons on the device are both large enough and easy to access. You want a control that does not protrude into the platform area like a joystick, as these are easily bent or broken if a  wheelchair user drives into it. You also need  a controller that is weather resistant will not become stuck. I prefer a “paddle style”  control with soft touch operation.

Site Preparation

This is the work required so that  your residential lifts provider can install your device safely. All porch lifts need some form of foundation for the device to be mounted to. This can be accomplished with a variety of methods but the most common would be concrete sidewalk blocks or a poured concrete pad. Next we need to ensure that there is no risk of a pinching hazard, so we ask that a sheer plate is added the deck side of the lift. Finally we need to minimize the risk of someone falling off the deck area if the lift is in the down position. An upper landing gate will need to  be constructed to meet this safety requirement. Another option would be to have your lift provider include a porch lift gate for an additional cost. For applications where the lift is directly in from of a door (like in a garage) we need to monitor the door with an interlock to ensure that the door will not open if the lift is not at that level.

More information on porch lifts and residential lifts can be found here

A complete list of contractual requirements can be found here —–> Porch Lift Contractor Requirements

A summery of this document can be found here ——>Porch lift features

You may qualify for the Residential Access Modification Program (RAMP) . Click here to download the application