Posts Tagged "accessibility elevator"

13Apr

Portable Wheelchair lift

by UppercutAndrew
Commercial Accessibility

Portable Wheelchair lift

We recently delivered a portable wheelchair lift to the Air Force Museum Society of Alberta. This product was the perfect solution as they had several locations which required temporary wheelchair lift access. This portable wheelchair lift easily rolls to each display and allows everyone to view all the amazing  features of the museum .

The RAM portable wheelchair lift is utilized when necessary, then stored away until another accessibility need arises. This was a far more cost effective solution than installing a stationary lift at each display. It also gives the museum the flexibility to move or add new attractions at a later date.

This wheelchair accessibility  lift is not intended to replace a permanent lift, and must be stored away from the place of access when not in use. The Portable Trus-T-Lift™ in not required to be inspected by AEDARSA (Alberta Elevating Devices  Amusement Rides Safety Association) due to its portable and temporary nature. Please note that portable wheelchair lifts are not intended to replace  or alleviate the need for a permanent installation. Chances are if you are required by code to make a space accessible you will need to go the permanent lift route.

The small footprint allows for easy storage and manoeuvrability . The dimensions can be viewed at the following Portable lift sample drawing.

If you require more information on permanent or portable accessibility lifts please visit the page here

19Dec

No hoistway necessary for this residential lift!

by UppercutAndrew

Wessex at bottomSometimes when we look at an application for  an accessibility lift, there simply isn’t enough space. In other instances we have the ideal space but the desired location will not allow for the hoistway and  corresponding load bearing wall.  I recently ran into this situation for one of our clients. No matter where we looked we couldn’t find both space and have the design be aesthetically pleasing. After exploring all the traditional elevator and lift systems I remembered seeing a “no hoistway” lift at the national elevator show in Boston last September. I had ridden in their working display model and recalled the smooth ride, and how compact,  and appealing it looked. This design abled us to place the lift exactly where the client wanted, without being an eyesore in their living room. The system works by  dropping a piece of the floor in place when the lift travels to the lower level. There are pressure sensitive plates on both the top and bottom of the lift to ensure that no one is in danger when the device is in use. The major benefit for this client was when the device was not being used he could send it to the basement and maintain the sight lines through his living room.

For more information or a brochure on this residential lift please click here

If you would like information on residential elevators please click here

9Dec

Greener Elevators and Lifts can save you money

by UppercutAndrew
Commercial Accessibility Home Accessibility Home Elevators News and Such

When I think of making an environmentally sound decision, especially if it pertains to green elevators or a lift purchase, I can point out 3 contributing factors .

 

                          alberta               #1 Where is the device  manufactured?

This seems pretty obvious but if you can purchase a locally manufactured elevator or lift, the transportation impact can be minimized. Buying local not only reduces emissions it saves you money on shipping costs associated with replacement parts.

 

 

#2 What impact could the drive mechanism have on the environment?

Devices that utilize large hydraulic pumps and reservoirs may need to have precautionary measures were taken, such as oil separators in the event of a hydraulic oil leak. This is to ensure that the oil cannot seep into the ground or water table. Some jurisdictions in the past have asked that food grade oil is used in order to alleviate this concern. Elevators and lifts that utilize a Traction Home elevatorCounter Weight or Screw Drive don’t actually pose this risk, as no hydraulic fluid is used. These greener solutions only require a 2″-3″  pit (or no pit at all) so there is less concern with disturbing ground water. You may even be able to save some money on your site preparation as hydraulic elevators can require anywhere from a 6″ to 60″ pit.

#3 What are the ongoing energy costs?

This cost is two fold; the energy consumed as it relates to the environment and the monetary cost directly to you. Do your research on how much energy your elevator or lift will require operating. Devices with a mechanical advantage such as a traction counterweight drive will be up to 50% more energy efficient that a comparative hydraulic unit. Hydraulic elevators have to pump fluid into a cylinder which is often located in a separate machine room.

It doesn’t matter if  your goal is to consciously protect the environment or simply save some money (energy costs, site preparation , and maintenance), it’s apparent that the two can go hand in hand.

 

For more information Elevators and Lifts please click here or contact us for a free consultation.

 

9Nov

Commercial accessibility lifts, and their limitations under the B-355 code

by UppercutAndrew

Commercial accessibility lifts are a cost  effective solution when it comes to making public buildings accessible. Vertical platform lifts or VPL’s can eliminate barriers for wheelchair users or those faced with mobility issues. Their relatively small footprint and minimal contractual requirement make them ideal for existing public buildings where accessibility is a concern. They do however have their limitations under the B-355 code, which they are inspected.

IMG_9377

Enclosed lift

The first consideration is platform size. Public accessibility lifts are mandated to have a platform that is no greater the 21 square feet. A typical “large” wheelchair lift would have a 48″x 60″platform. This size of platform is big enough to accommodate a wheelchair user doing a 90-degree turn. A more common size would be in the range of 34″ x 54″ where the user enters and exits on the same side, or travels through the platform and exits on the opposite side.

Next, we must look at the  travel restrictions that are imposed within the code. Enclosed  B-355 accessibility lifts can travel no more than 7000mm or 23.1 feet. Unenclosed wheelchair lifts can travel up to 2500mm or 98.25″. Enclosed units will require a hoistway constructed around the device with a door at the lower landings and the minimum of  a gate at the uppermost landing. Unenclosed units travelling more than 500mm (19.65″) will require a gate or a door at the upper landing. It should be noted that any lift penetrating a floor will be required to be an enclosed vertical platform lift needing a hoist-way constructed.

The weight capacity  of wheelchair accessibility lifts varies from manufacturer to manufacturer, but most unenclosed vertical platform lifts have a capacity of either 550lbs or 750lbs. Enclosed units usually have a capacity  somewhere between 750lbs – 1400lbs.

 

20150122_132001

Unenclosed lift

 

 

Perhaps the biggest drawback of public accessibility lifts is the requirement for them to operate using constant pressure. This simply means you must hold the button for the device to operate. This is partially due to the fact the lift platform has no gate or sliding elevator door.

As universal accessibility for all members of society  is now considered the norm , the popularity of these barrier free lifts has increased. You can find barrier-free accessibility lifts  in most schools, community centres and places of worship.

 

For more information on commercial accessibility lifts please contact us for a free consultation

 

 

 

 

 

3Nov

Uppercut Elevators and Lifts – A local company serving the entire province of Alberta

by UppercutAndrew

What makes a company local? It is my belief that to be truly local your company needs to encompass the following principles:

LOCAL OWNERSHIPAlberta-flag

It’s not good enough to have a local manager or even a local owner that has other interests and doesn’t make the time to come into the office every day. Local owners answer the phone, deal with client concerns directly, and treat their staff fairly. After all, the owner sets the standard as to how the business operates. We believe in being accountable, fair and ethical. At Uppercut Elevators and Lifts, ownership is present every day  to make sure this standard is met.

OFFICES IN BOTH CALGARY AND EDMONTON

Believe is or not there are some companies that would mislead you into believing they are local because they have a PO box and a sales person who is willing to travel to your city on occasion. We believe in hiring the best local individuals who are able to participate and give back to the communities where they work and live. We believe it is imperative that local staff  are available to meet with you on your schedule not “when they are in town next”. We are proud to have offices in both Calgary and Edmonton, that are staffed with local employees.

LOCAL PRODUCTS

Our Elevators and Vertical Platform Lifts are manufactured in Alberta by Albertans. In these tough economic times, it only makes sense to support the business and tax base where we live.

PROUD TO BE LOCAL

We are pleased to be able to service the entire province of Alberta with our  superior elevator and lifting product line. We know we can accommodate  the needs of our clients better if we hire local representatives, and ownership is present to steer the ship in the right direction. We are proud to be a truly local company operating in Alberta.

 

For more information on our products click here

To find a local representative click here

You can find our products installed in Cold Lake, Edmonton, Drumheller, Red Deer, Strathmore, Calgary, Okotoks, High River, Lethbridge, Vulcan, Brooks, Olds, Medicine Hat, and all across the great province of  Alberta

 

22Oct

LULA Elevators (Limited use limited application) for Commercial Applications

by UppercutAndrew

LULA elevators are a great solution when an accessibility lift isn’t enough, but a passenger elevator is more than you need. As the title indicates LULA stands for Limited Use / Limited Application. By the very nature of the name it is obvious that this product does have  its limitations. While LULA elevators function in a similar manner to passenger elevators (automatic operation and sliding elevator doors) the following restrictions apply:

Car SizeLULA elevators

A LULA elevator can have maximum car size of 18 square feet. This restriction makes it impossible to accommodate a stretcher,  and therefore if this is a code requirement, a LULA is not a suitable option.

Speed

Your LULA elevator will operate at 30 feet/minute

Travel

In Alberta a LULA’s can travel up to 7.6 meters if there  is stretcher access already in the building. If not we are limited to 7 meters of travel. This typically limits a LULA elevator to 3 floors in a low rise building. If the device travels more than 7 meters it will be required to have fire service, just like a passenger elevator

Capacity

LULA’s typically have a maximum  capacity of 1400lbs

Benefits of a LULA include:

  • Less construction cost for the hoist-way (smaller pit, less load on the supporting wall etc.)
  • Smaller footprint (even less space required if you choose a MRL unit)
  • Lower cost for the equipment compared to a passenger elevator
  • Lower cost for maintenance compared to passenger elevators
  • Automatic operation and sliding elevator doors (functions and looks like a passenger elevator)

We often refer to a LULA   as a  hybrid between a commercial accessibility lift and a passenger elevator; therefore it  is a perfect solution for wheelchair access in low rise public  buildings where the use is limited.

For more information on LULA elevators, contact us or download our LULA Brochure

Uppercut Elevators and Lifts is proud to offer Made in Alberta solutions

 

 

 

14Sep

Uppercut Elevators and Lifts – Made in Alberta Solutions

by UppercutAndrew

As a proud Albertan company, Uppercut Elevators and Lifts believe in supporting our local economy, so it makes sense to buy local whenever possible. For this reason, all  the  elevators and vertical platform lifts we purchase  are manufactured here in Alberta (Edmonton).

Uppercut Elevators and Lifts

We also believe in the importance of  local ownership. Owners that are present and active within the business, in my opinion, are able to better understand the unique needs of their clients. My own experience spans 17 years, many of which I have been a managing owner. In this time I have learned the value of getting to know my clients and gained the perspective to provide them with the best possible solution.

If you make the claim that you are local, you need to back it up with infrastructure and staff that actually live in the communities they work. We are not proponents of “parachuting” in staff which is reflected by the fact we have offices in both Calgary and Edmonton. These offices are fully staffed with skilled employees and are prepared to serve you in a timely fashion.

This commitment to being truly local is represented in our mission statement:

Our Mission

To provide a local solution using superior products and services for all your residential elevator and commercial accessibility lift needs. We adhere to the values of accountability, flexibility, and attention to detail to ensure the best possible consumer experience.  

You can find our elevators and lifts installed throughout the province including major centers such as Lethbridge, Calgary, Red Deer and Edmonton.

For more information on a local solution to your residential elevator or commercial accessibility lifts needs please click here.

You can also reach us via the phone:

Calgary Office 403.519.3186

Edmonton Office 587.597.9959

11Sep

Free Tickets to the Calgary Home + Design Show

by UppercutAndrew

The Calgary Home and Design Show is just around the corner, and we would love to see you there!

The show runs from September 17th – 20th at the BMO Center. Show hours are:

Thursday – 4pm-9pm20150227_141223

Friday – noon – 9pm

Saturday – 10am – 9pm

Sunday 10am – 6pm

We have 4 sets of tickets to give away to the first 4 people to email Andrew – Simple as that!

Send Andrew an e-mail and the tickets are yours.

We are located in booth #324 so stop by and say hello.

What does a stair lift cost?

by UppercutAndrew

Well what does a stair lift cost? Before we can answer the question you need to be aware of what is included in the quote.

What does a stair lift cost?

Stair Lifts – for straight stairways

Along with a detailed quotation specifying the product offering it is important to know if the quoted price includes:

  • Shipping (especially if you buy on-line)
  • Installation
  • Warranty
  • A custom device build specifically for your stairs (for curved stair-lifts)

Once you have determined what is included the next step will be to evaluate the company who you are purchasing the lift from.

  • Do they have an office and a showroom where you can view the product?
  • Do they have factory trained technicians on staff?
  • Do they have staff specifically dedicated to lifting devices?
  • Can you reach them after hours?
  • Do you get directed to a 1-800 number or a call center, or do they have a customer service department?
  • Is the product they are offering you the only choice they have, or is it the best choice?

Now you are ready to make an”apples to apples” comparison. We would offer a straight run Stair-Lift for approximately  $3000.00 +- 10% depending on the installation. Our price would include an installation by a factory trained technician. It would also include the warranty and shipping. We invite our clients to call us and book an appointment in their home or to come and visit us in our showroom. Our knowledgeable sales team is supported by a group of skilled technicians who deal solely with lifting devices.

For  more information on Stair Lifts contact us or click here for a brochure.

 

 

 

28Aug

Custom Curved Stair Lifts

by UppercutAndrew

custom curved stair liftsMany people are unaware that a stair-lift can accommodate stairs which bend or turn. While straight run units are more common, as home designs change, custom curved stair lifts are raising in popularity. There are a variety of quality chair lifts on the market. The following post will outline some of the things to consider when choosing a stair-lift provider.

 

Custom built VS off the shelf

Our preference is to use a manufacturer that builds their stair lift exactly for your stairway. This ensures the tightest possible fit to minimize any obstruction on the stairs. This process requires a trained individual to measure your stairs using a special camera and a series of tiles. These pictures are uploaded into a program, and then site specific drawings are created. Once the drawing is approved the lift can go into production. This entire process usually take 4-8 weeks.

 

Alternatively some manufactures offer standard “off the shelf ” bends. It is our experience that when a track is not built specifically for your stairway you run the risk of wider turns or uneven spacing where the track winds around  landings. It’s like if you went to the shoe store and needed a size 9 shoe but all the clerk could offer you was a size 8 or a 10. While the size 10 may work, it’s not the best possible fit. An advantage of “off the shelf” units is that they can typically be provided in under 4 weeks.

Both Custom and off the shelf curved stairlifts sell for approximately the same price.

Experience

It is important to know how long the company you choose to deal with has been selling and installing stair lifts. I personally have close to 18 years of experience specifically dedicated to accessibility lifts. Our technical support team has installed a multitude of curved and straight run lifts over the years. With all this experience we can ensure your lift is quoted to meet your needs, is measured correctly, and installed in a professional manner.

Detailed Quotations

Make sure you examine your quotation closely. Does it detail the path of your lift? Did the sales person provide a drawing or a sketch? If you accept a quotation from a vendor that is not detailed , you run the risk of having the device not function as you may of thought. For instance was the stair-lift meant to bend 180 degrees at the bottom landing to clear a hallway? Would you benefit from having the device over-run at the top landing and possibly park 90 degrees around a corner? It’s very important to have all the bends detailed to ensure you are making an “apple to apples” comparison.

For more information on stair lifts contact us or click here

For information on straight run stair lifts click here