Posts Tagged "what does an elevator cost"

9Dec

Greener Elevators and Lifts can save you money

by Andrew @ Uppercut
Commercial Accessibility Home Accessibility Home Elevators News and Such

When I think of making an environmentally sound decision, especially if it pertains to green elevators or a lift purchase, I can point out 3 contributing factors .

 

                          alberta               #1 Where is the device  manufactured?

This seems pretty obvious but if you can purchase a locally manufactured elevator or lift, the transportation impact can be minimized. Buying local not only reduces emissions it saves you money on shipping costs associated with replacement parts.

 

 

#2 What impact could the drive mechanism have on the environment?

Devices that utilize large hydraulic pumps and reservoirs may need to have precautionary measures were taken, such as oil separators in the event of a hydraulic oil leak. This is to ensure that the oil cannot seep into the ground or water table. Some jurisdictions in the past have asked that food grade oil is used in order to alleviate this concern. Elevators and lifts that utilize a Traction Home elevatorCounter Weight or Screw Drive don’t actually pose this risk, as no hydraulic fluid is used. These greener solutions only require a 2″-3″  pit (or no pit at all) so there is less concern with disturbing ground water. You may even be able to save some money on your site preparation as hydraulic elevators can require anywhere from a 6″ to 60″ pit.

#3 What are the ongoing energy costs?

This cost is two fold; the energy consumed as it relates to the environment and the monetary cost directly to you. Do your research on how much energy your elevator or lift will require operating. Devices with a mechanical advantage such as a traction counterweight drive will be up to 50% more energy efficient that a comparative hydraulic unit. Hydraulic elevators have to pump fluid into a cylinder which is often located in a separate machine room.

It doesn’t matter if  your goal is to consciously protect the environment or simply save some money (energy costs, site preparation , and maintenance), it’s apparent that the two can go hand in hand.

 

For more information Elevators and Lifts please click here or contact us for a free consultation.

 

14Sep

Uppercut Elevators and Lifts – Made in Alberta Solutions

by Andrew @ Uppercut

As a proud Albertan company, Uppercut Elevators and Lifts believe in supporting our local economy, so it makes sense to buy local whenever possible. For this reason, all  the  elevators and vertical platform lifts we purchase  are manufactured here in Alberta (Edmonton).

Uppercut Elevators and Lifts

We also believe in the importance of  local ownership. Owners that are present and active within the business, in my opinion, are able to better understand the unique needs of their clients. My own experience spans 17 years, many of which I have been a managing owner. In this time I have learned the value of getting to know my clients and gained the perspective to provide them with the best possible solution.

If you make the claim that you are local, you need to back it up with infrastructure and staff that actually live in the communities they work. We are not proponents of “parachuting” in staff which is reflected by the fact we have offices in both Calgary and Edmonton. These offices are fully staffed with skilled employees and are prepared to serve you in a timely fashion.

This commitment to being truly local is represented in our mission statement:

Our Mission

To provide a local solution using superior products and services for all your residential elevator and commercial accessibility lift needs. We adhere to the values of accountability, flexibility, and attention to detail to ensure the best possible consumer experience.  

You can find our elevators and lifts installed throughout the province including major centers such as Lethbridge, Calgary, Red Deer and Edmonton.

For more information on a local solution to your residential elevator or commercial accessibility lifts needs please click here.

You can also reach us via the phone:

Calgary Office 403.519.3186

Edmonton Office 587.597.9959

15Apr

What’s the difference between a residential elevator and a residential vertical platform lift

by Andrew @ Uppercut

The short answer is vertical platform lifts are typically installed due to an immediate accessibility requirement, while elevators are usually incorporated for luxury or ageing in place purposes. Of course, there are always exceptions, so it is important to understand the limitations  and features of each device.

Trus-T-Lift™ enclosed – Vertical platform lift

Trus-T-Lift™ enclosed – Vertical platform lift

Code

While residential elevators and lifts are not inspected in Alberta, there are governing codes that exist. Elevators fall under the B-44 code while accessibility lifts are built to meet the B-613 code. Ultimately it is these codes that provide the distinction between the products.

Constant pressure or automatic operation

Elevators utilize automatic operation, while a lift will require that you hold the button for the device to function. Holding the button or constant pressure operation limits your risk for pinching or shearing hazards. I go into more detail below.

Elevator car or lift platform

An elevator will always have an enclosed car usually complete with a ceiling. Your entrances will have either a light curtain, accordion gate or a sliding elevator door. This is due to the above mentioned automatic operation. A lift, on the other hand, will have an “open platform” so the hoistway around you is exposed, thus the requirement for constant pressure operation.

 

 

Speed 

Lifts will have an operating speed of 8ft/min – 18ft/min. An elevator usually functions between 20ft/min – 40ft/min.

Capacity

Crystal – Residential Elevator

Crystal – Residential Elevator

Capacity usually isn’t a factor as platform sizes are limited, but lifts will start at 550lbs (most are 750lbs) and elevators will range from 800lbs – 1400lbs.

Flexibility and features

While I have installed  some pretty fancy lifts in my time, most of the  upgrades people look for are usually only offered with an elevator purchase. These can include, automatic homing, hands-free phone systems, and custom interior finishes. We can usually make an elevator fit into the desired space while a lift is more of a “cookie cutter” design.

Cost

For the purpose of comparison let’s use a 2 stop with 10′ of travel, and entrances on the same side. A lift will cost you approximately $13,000.00 and an elevator will land around the $17,000.00 mark.

This obviously is general information and is based on specific product offerings, but should give you the tools to differentiate between an elevator and a lift.

Drawings and the corresponding site preparation for these devices can be found here

More information on residential elevators can be found here

More information on residential lifts can be found here

 

 

31Mar

Residential Elevators – What do they cost?

by Andrew @ Uppercut
Home Elevators

This is by far the number one question we get asked at Uppercut Elevators and Lifts. How much for an elevator? There is no straight forward answer, as many variables come into play. In this blog post however,  I will attempt to give you the tools to determine a reasonable estimate for your elevator  including the installation . Please note that these prices are product specific, and are based on our current pricing structure. This article is only attempting to give you a reasonable “ballpark” figure for your home elevator. Obviously, prices will vary depending on your supplier.

Elevator in home

Elevator in home

Cost Variables

For the purpose of simplicity we will base the elevator specification on the following:

2 stops ( we will use basement and main floors as an example)

Automatic operation (otherwise it is an accessibility lift)

Entrances on the same side

Standard finishes

11 feet of travel (from top of basement floor to top of the main floor)

Light screen protecting the entrance side

Machine-room-less application

Small ramp or 2″ pit requirement

20 feet/ minute speed

800lb Capacity

40″ X 54″ car size

Installation of your elevator in Calgary

 

I thought it necessary to mention the pit depth and the lack of a machine room as these are contractual requirements  that affect the overall cost. We will address these variables later on.

More detailed information on this product offering can be found here

Elevator Cost

It would be reasonable to expect the cost of the above-mentioned device to sell for around $17,500.00. Adding a third stop, say to a mid landing garage at grade would involve the additions of a second light screen, another interlock and call station. You could expect this to add about  $1,000.00 to your overall cost. A smaller car will save you money while a larger one can add $400.00 – $500.00. If you reduce the  travel of your elevator (less than 9 feet) the device could cost up to a $1000.00 less ,while the opposite may occur if your home elevator needs to travel up to 14 feet. Devices travelling more than 14 feet usually utilize a different drive mechanism, which involves a per foot charge and a different product offering such as the RAM Crystal.

Contractual Costs or Site Preparation

Stratus – Residential Elevator

Stratus – Residential Elevator

Knowing the cost of your elevator only gives you half the information. The work required prior to a factory trained technician installing your device is the other cost you will have to account for. The following is a brief summary of contractual work that may have to be done.

  • Pit or ramp – we typically  ask for a 2-3 inch pit but some models (usually hydraulic) require up to a 14″ recess in the floor. In some jurisdictions, you may need a pit drain and/or a sump pump, as well as a hydraulic oil separator. If a pit is not possible you will need a small ramp granting access up to the elevator car floor.
  • Electrical – this varies but most devices require both 120 VAC and 220 VAC brought to the appropriate disconnect.
  • Machine room – Hydraulic units and some cable drives typically  require a machine room. This is not only a cost you will have to absorb, it’s also space you will have to part with. I personally prefer machine room-less elevators for this reason.
  • Hoist-way Structure – These are the walls around your elevator which include the rail wall blocking. They are usually built using wood construction (2×4 or 2×6). Standard household doors (solid core) will also need to be provided.

For a complete list of the contractual requirements please click below.

Drawings and contractual requirements for this device can be found here

 

If you require any additional information on home elevators or  lifts please do not hesitate to contact us.

 

 

 

 

9Mar

Planning for a Residential Elevator

by Andrew @ Uppercut
Home Elevators

Planning for a Residential Elevator

People install a residential elevator in new home construction for many reasons. Some folks implement an elevator into their design for luxury, others out of necessity, but the vast majority of people I see do it so they may age in place. It is very important to do your research and understand your options.  As the saying goes “if you fail to plan you plan to fail”. This statement certainly applies to your aging in place elevator. There are several factors you must consider to ensure that your home elevator will meet both your needs today, and in the future.

Elevator in home

Elevator in home

 

The first thing to consider is car or platform size. I have heard numerous times ” we don’t need the elevator to fit a wheelchair” , my answer is always “we hope for the best but plan for the worst” If you are going to the expense of adding an elevator to your home, we need to consider wheelchair accessibility. My experience working with home medical companies tells me that we need a minimum platform size of 34″ x 54″. Many standard platforms are 48″ long, please try to resist going with the smallest platform available.

Home elevator with a gate

Home elevator with a gate

Next we must decide on the aforementioned gates, elevator doors or light screens. As you travel in your home elevator we need to ensure that you cannot come into contact with the hoistway that houses the device. While all mechanisms will accomplish this, they vary in ease of use, aesthetics, and cost. An automatic elevator door is probably the most aesthetically pleasing and is very easy to use (it automatically opens and closes) but it is by far the most costly option. Next in the cost category would be an accordion gate. You won’t break the bank by adding gates to your residential elevator car, but they don’t have a great reputation when it comes to looks or ease of use – especially for wheelchair users. The final and most cost effective option would be a light curtain. This “virtual gate” ensures that if any object comes into contact with the residential elevator hoistway the elevator instantly stops. They operate using a series of light beams that shoot across the entrance way, if the beam is “broken” the elevator ceases to operate until the obstruction is removed and a floor is selected. From a wheelchair users perspective or anyone with limited mobility not having to reach back and close a gate eases the use of your home elevator.

Home elevator with a light curtain

Home elevator with a light curtain

Elevator in home Elevator car 1 e1424535547307 Home elevators residential lifts commercial lift

The best way to ensure all these points are considered is to consult a professional. Many elevator companies will offer no cost or obligation consultations. They should be able to address your needs and answer your questions prior to you paying a deposit or making a commitment. Don’t base your elevator design from the back of a brochure, or from a generic drawing. Remember, site specific drawings will ensure that your elevator will meet both your needs today and allow you to age in place.

For more information on a residential elevator call us today.