Posts Tagged "lowering my elevator"

10Mar

Evacuation and battery back up options for your residential elevator

by UppercutAndrew
Uncategorized

I think humans by nature have a fear of being trapped in an elevator and therefore I usually don’t get through a sales meeting without one of the two following questions being asked:

  1. What do I do if the elevator gets stuck?
  2. What happens if the power goes out?

Both questions are valid and fortunately, we have a variety of solutions that can ease these fears.

I would start by saying that one thing you can do to guarantee piece of mind is having your elevator properly maintained by a factory trained technician. The second thing would be to ensure there is a phone in your elevator so you can call for help if necessary.

Ok, now back to the easing your fears about getting stuck in that elevator. The following are standard and optional features that can allow for a safe evacuation from your elevator.

Manual lowering (or raising)  

All devices that I am aware of have some form of manual lowering. Hydraulic units typically will have a button in the machine room that will open up a hydraulic valve and lower you at a regulated rate. Fluid is released from the cylinder, back into the reservoir. Of course, this means you can only be lowered and never raised, even if you need to get out at the upper level which is merely inches away.  Traction counter weight and ACME Screw drives utilize a gear reduced crank that allows you to be moved in both an upward and downward direction. The obvious benefit here is, in the event of a flood or fire you may not necessary want to be evacuated to the lowest level as the exit to your home may be on levels 2, 3 or 4.

Emergency Battery lowering

Battery lowering is useful in the event of a power failure where your major concern is simply being able to exit the elevator. As the name indicates the elevator will only continue to operate in the downward position. The intention is to have you safely evacuate the device at the lowest level.

Battery Backup (or DC operation)

IMG_2230

This term is sometimes confused with Emergency battery lowering. A vendor may tell you “all our units have battery back-up” but they may be referring to the ability to lower only via an emergency battery system (see above). Battery backup or DC operation means that there is a battery system in place that  allows the elevator to function when the power is out. A true battery operated system will allow the user to have  uninterrupted use in the event of a power failure. The device will travel both up and down, and be able to complete 30-40 cycles while the mains power is out. This system can function using a variety of methods, but a unit like the RAM Crystal or Stratus switches between AC and DC power depending on the remaining charge in the batteries. This option gives you true piece of mind if you are reliant on your elevator due to an  accessibility need.

The interlocks on residential elevators and lifts will have a tool that allows you to open the door(from the outside) regardless if the lock is energized or where the car is located. I would, however, caution you to never crawl out of a device that is between floors unless it is absolutely necessary (life or death situation) . Your first  line of defence is to always call your elevator provider as soon as you experience an issue.

 

I would like to close by saying that getting trapped in your home elevator or lift is extremely rare. In my 18 years of experience and hundreds of elevator installations,  I can count only a handful of entrapments that required a technician to rescue an individual.

 

For more information on residential or commercial devices contact us anytime and we will be happy to answer your questions